Anritsu Network Master MT9090A Series, Operation Manual, Page: 135 / 200

MT9090A/MU909011A Network Master User’s Guide 4-37
9. Connect the next fiber to be tested and press the
Start key to continue.
Real Time Testing
Real Time test mode provides a quick “real-time” view of the
initial trace information. In this mode, trace data is not
continually averaged, but is stopped and restarted after each
screen update. Real Time mode enables optimization of fiber
connections at or near the OTDR connector, as the trace
display shows the effects of making changes to the
connections.
To start a Real Time test:
•
With the Trace View screen displayed, press Start
Real Time ( F1 ). The legend on the softkey changes
to Stop Real Time and the test begins.
Figure 4-24: Real Time test in progress