Anritsu MX183000A, Operation Manual, Page: 59 / 226

4.3 Measurement System Configuration
4-5
4
O
per
ation
4.3 Measurement System Configuration
4.3.1 Selecting Application
On launching the software, the Selector screen is displayed. The Selector
screen allows you to select the application for measurement.
Figure 4.3.1-1 Selector Screen
Table 4.3.1-1 Selector Screen
Item Description
Application
selection area
Selects the application for measurement.
The applications available for selection will vary depending on the
options installed.
● PCIe Link Sequence
Refer to 4.4 “PCIe Link Sequence.”
● USB Link Sequence
Refer to 4.5 “USB Link Sequence”
● Jitter Tolerance Test
Refer to 4.6 “Jitter Tolerance Test.”
Start Displays the measurement screen for the corresponding application.
Close button Exits the software.
Close button
Start
Application Selector
box
Menu