Anritsu MX183000A, Operation Manual, Page: 27 / 226

2.3 Installation/Uninstallation
2-3
2
B
ef
or
e Us
e
2.3 Installation/Uninstallation
MX183000A can be used in two installation modes: installation on
MP1800A and installation on an external PC.
This section describes how to install MX183000A when using MP1800A.
When using MP1800A, use the NI-VISA Installer in the USB memory
stick that contains MX183000A (see page vi “Before Using VISA For
Those Who Use MP1800A”).
When using MT1810A, you need to obtain the NI-VISA Installer yourself.
2.3.1 Installing
1. Install NI-VISA on the MP1800A or the external PC on which the
MX183000A is to be installed.
If NI-VISA is already installed, skip
steps 2 to 4 and proceed to step 5
2. To install NI-VISA on the MP1800A, insert the USB memory stick
into the MP1800A and copy the installation file to the built-in HDD.
To install NI-VISA on the external PC, insert the USB memory stick
into the external PC.
3 End all active applications. End Main application, and click the
Close (X) button on the Selector screen.
4. Execute visa462full.exe to start installation.
The file is stored in the following folder in the USB memory stick.
\Software\visa462full.exe
Install as instructed on the screen.
5. Set up NI-VISA. Launch Measurement & Automation Explorer from
the Start menu.