Anritsu MG369 Series, Operation Manual

Page: 118 / 268

Setting
Increment
Sizes The Increment menu lets you set the incremental
size for editing frequency, power level, and time pa-
rameters. When the increment mode is selected on,
these parameter values will increase or decrease by
the set amount each time the
Ù
or
Ú
pad is pressed
or the rotary data knob is turned clockwise or coun-
ter-clockwise. The menu also lets you turn the incre-
ment mode on and off.
To access the Increment menu from the System
Configuration menu, press
Increment > . The Incre-
ment menu (below) is displayed.
Press Frequency Increment to open the frequency
increment parameter.
Press Level Increment to open the power level in-
crement parameter.
Press Time Increment to open the time increment
parameter.
Open the parameter you wish to change, then edit
the current value using the cursor control keys, ro-
tary data knob, or enter a new value using the key
pad and appropriate termination key. When you
have finished setting the open parameter, close it by
pressing its menu soft-key or by making another
menu selection.
Press Increment Mode to turn the increment mode
on. Press Increment Mode again to turn it off.
Press < Previous to return to the System Configu-
ration menu display.
3-84 MG369XB OM
System Configuration Local (Front Panel) Operation