Anritsu Mainframe MU909060A Series, Operation Manual, Page: 91 / 190

3.2 Application Ethernet Setup
3-3
3.2 Application Ethernet Setup
There are two different types of setup for the Ethernet application.
•
Interface
•
Test Automator
Pressing the F2 soft key displays a selector to select between these two
types of setup.
3
Ether
n
et Applicat
ion
Figure 3.2-1 Setup Selector
The interface setup is where the common setup for all tests is done.
Navigation throughout all the interface setup screens is done with the
Up, Down, Left and Right arrow keys. The red frame in Figure 3.2.1-1
shows the current selected item. The selection is set by pressing the Set
key.