Anritsu Mainframe MU909060A Series, Operation Manual, Page: 159 / 190

5.2 Setup Interface
5-3
5
Pa
ss T
h
roug
h
5.2 Setup Interface
The Setup Interface screen consists of one panel:
•
Port Panel (Figure 5.2.1-1)
When entering this screen, a new Port button (F4) is added at the bottom
of the soft key menu.
Figure 5.2-1 Port Button, Port A
This button displays the currently active port and also allows the user to
switch between Port A and Port B.
5.2.1 Port
Figure 5.2.1-1 Setup Interface, Port – Auto Negotiate
The Up/Down arrow keys and the Set key are for navigate and select
settings. See Section 1.2.2 “Panel Keys”.
When Auto Negotiate selected at Port Mode (Figure 5.2.1-1):
[1] This switches the port on and off.
[2] This indicates the current interface type for the selected port (RJ-45
or SFP).
[3] This selects the mode for the linking port. There are two modes:
Auto Negotiate (Figure 5.2.1-1), or Forced (Figure 5.2.1-2).
[4] This selects the link speed modes advertised by the Network Master.
[5] This selects which link partner is the master and which is the slave
during auto negotiation (1000 Mbps mode only).
2
3
4
5
1