Anritsu Mainframe MU909060A Series, Operation Manual, Page: 154 / 190

Chapter 4 Application Reflector
4-6
4.2.2 Reflector
The Reflector screen is used for making specific settings for the Reflector
test.
Figure 4.2.2-1 Setup Interface (Reflector)
[1] This is the mask setting that specifies the range of reflected MAC
addresses, excluding multicast and broadcast. See the following
example below for clarification.
Example 1: Reflects all MAC addresses with
the last three bytes of FC-0A-01
Example 2: Reflects only specified MAC
address A0-52-43-FC-0A-01
[2] This enables/disables IP address swapping for reflected data
packages.
[3] This sets the local IP address.
[4] This sets the local MAC address.
[5] This
enables/disables answers to ARP requests.
[6] This enables/disables answers to ping requests. All ping requests are
reflected regardless of this setting.
1
2
3
4
5
6