Anritsu Mainframe MU909060A Series, Operation Manual, Page: 152 / 190

Chapter 4 Application Reflector
4-4
4.2.1 Port
Figure 4.2.1-1 Setup Interface, Port – Auto Negotiate
The arrow keys and the Set key are used to navigate and select settings.
See section 1.1.2.
The above figure shows the port setup screen when Auto Negotiate is
selected:
When Auto Negotiate selected at Port Mode (Figure 4.2.1-1):
[1] This switches the port on and off.
[2] This indicates the current interface type for the selected port (RJ-45
or SFP).
[3] This selects the mode for the linking port. There are two modes:
Auto Negotiate (Figure 4.2.1-1), or Forced (Figure 4.2.1-2).
[4] This selects the link speed modes broadcast by the Network Master.
[5] This selects which link partner is the master and which is the slave
during auto negotiation (1000 Mbps mode only).
2
3
4
5
1