Anritsu Mainframe MU909060A Series, Operation Manual, Page: 141 / 190

3.8 RFC2544 Tests
3-53
3.8.3 RFC2544 Burst Test Setup
The RFC2544 Burst test is also called the burstability or back-to-back
test. It determines the largest number of frames transmitted with
minimum IFG (Inter Frame Gap) that the DUT can handle without
frame loss.
Up to eight RFC2544 Burst tests can be added to the test schedule in
Test Automator. Each test has its own set of parameters. To setup a
RFC2544 Burst test press the
icon at the Test Automator screen. See
section 3.2.4 for more information on Test Automator.
3
Ether
n
et Applicat
ion
Figure 3.8.3-1 RFC2544 Burst Setup Screen, Test Mode Pane
To return to the Test Automator screen, press Back (F1).