Anritsu BTS Master MT8222A, User Manual, Page: 85 / 115

8-5 Updating Instrument Firmware Master Software Tools
8-2 PN: 10580-00156 Rev. T BTS Master UG
8-4 Installing MST
MST is provided on the CD-ROM included with the instrument. Insert the CD-ROM into a PC
to run the installer. Follow the onscreen instruction.
8-5 Updating Instrument Firmware
1. Connect the BTS Master to a PC by using USB or Ethernet. Refer to the Master
Software Tools (MST) User Guide (on the CD-ROM) for information regarding
connecting your BTS Master to a PC.
2. Run Master Software Tools
3. From the Connection menu:
• for a USB Connection, Select
Connect – USB
.
• for an Ethernet Connection:
a. Enter the IP Address of your BTS Master by first clicking
Enter IP Address…
b. Then click
Connect – Ethernet: xxx.xxx.xxx.xxx
• In either type of connection, the connection type is displayed in the toolbar.
4. From the Tools menu, click
Product Updates
.
The Product Updates window opens.
Figure 8-1. IP Address in Connection Button
Figure 8-2. Tool Menu: Product Updates Command