Anritsu BERTWave Series, Operation Manual, Page: 97 / 466

2.8 Turning Power On/Off
2-23
2
B
ef
or
e U
se
2.8.2 Power-off
1. Click System Menu in the application window.
2. Click Exit.
3. Click Yes.
4. Press the Power switch.
The Power switch blinks in green. After the power-off process has
completed, the power switch lamp goes off, and the Standby lights
orange.
Notes:
•
If the power plug is removed while the panel access lamp is lit,
the data may not be saved correctly. Depending on the type of
data that was not saved correctly, sometimes the equipment
may not start correctly at the next power-on. Remove the power
plug after cutting the power.
•
The power may not turn on correctly if the power is turned off
and then turned on again immediately after the Standby
illuminates orange.
Wait at least 5 seconds after turning off the power before
turning on again.