Anritsu BERTWave Series, Operation Manual, Page: 313 / 466

6.9 Measuring Waveform
6-119
6
How to Operate Sampling Scope
Note:
Up to 1023 characters can be entered. However, all characters may
not be displayed because the characters that can be displayed are
limited.
The color of the label cannot be changed.
Deleting the displayed label
The channels subject to label deletion vary depending on the Control Ch
setting.
All
Deletes labels for all channels.
Single Deletes the label for the active channel.
1. Click
Setup to open the Setup dialog box.
2. Click Utilities tab.
3. Click Delete for Label, and the displayed label is deleted.
6.9.9 Saving Measurement Results
The sampling oscilloscope results can be saved in the following file types:
●
Screen image
The image of the entire screen or only the measurement screen is
saved to a PNG or JPEG file.
●
Measurement result
The waveform is saved as a text file or CSV file.
●
Measurement conditions
The setting values in the Amplitude O/E, Measurement, Setup, and
Time CRU dialog boxes are saved to a file.