Anritsu BERTWave MP2100B, Operation Manual, Page: 78 / 382

Chapter 2 Before Use
2-24
2.11 Setting Control Panel
The BERTWave is set to the factory defaults for optimal measurement.
Changing the Windows settings is outside the scope of operation
warranty. In addition, the performance may drop or functions may not
operate correctly if the Windows settings are changed. Read the general
notes in this section carefully when changes to the Windows settings are
required.
CAUTION
Anritsu guarantees the BERTWave to work properly only
when the factory settings for Windows have not been
changed.
BERTWave operations are not guaranteed if program
installation or update, including Windows Update, is
performed.
Changing registries may cause abnormal operations.
2.11.1 Displaying Windows Desktop
Connect a mouse and a keyboard to operate Windows. Use the accessory
USB mouse and a compatible USB keyboard.
The Windows desktop can be displayed as described below.
To display the BERTWave application again, touch [MX210000A] on the
Windows taskbar.
When using touch panel and mouse:
1. Touch [Main Application] at the Selector screen.
2. The measurement screen is displayed. Touch [System Menu] on the
left upper side of the screen.
3. Touch [Minimize].
When using keyboard:
Press the W [D]. All windows will be minimized to display the
Windows desktop.