Anritsu BERTWave MP2100B, Operation Manual, Page: 252 / 382

Chapter 7 Measuring Waveform
7-66
7.14 Using Trace Memory
The trace memory is a function to save the measurement waveform in the
memory.
The waveform saved in the trace memory calls the reference trace.
To save the waveform in the trace memory
1. Touch [Setup] to open the Setup dialog box.
2. Touch the [Utilities] tab.
3. Touch the Ref.Trace Channel button and select the channel to be
saved from the following.
[Ch A & Ch B]
[Ch A]
[Ch B]
4. Touch [Set Reference].
5. The trace waveform is displayed in the screen.
Trace memory A
Trace memory B
Figure 7.14-1 Waveform Display of Trace Memory
To delete the trace memory waveform
1. Touch [Setup] to open the Setup dialog box.
2. Touch the [Utilities] tab.
3. Touch [Clear Reference] to delete both reference traces in Channel A
and B.