Anritsu BERTWave MP2100B, Operation Manual, Page: 131 / 382

4.8 Displaying Date/Time and Status
4-19
4
Screen Oper
ation
4.8 Displaying Date/Time and Status
To display date and time
Date and time is displayed on the upper right side of the screen.
Date and time can be changed from the Windows control panel.
To display status
The following four kinds of indicators indicate the status.
Table 4.8-1 Indicator status
Indicator Status
System System Alarm
Remote Remote Control
Measure Measuring bit error rate or acquiring waveform data
of sampling oscilloscope
Output A signal is output from one of the PPG channels or
from the optical transceiver.
Figure 4.8-1 System Alarm Occurred
Figure 4.8-2 Remote Control
Figure 4.8-3 Displays at Bit Error Rate Measurement and Waveform
Data Capture
Figure 4.8-4 Display when PPG Signal is Output