Anritsu BERTWave MP2100B, Operation Manual, Page: 129 / 382

4.6 Linking Measurement Settings for Multiple Channels
4-17
4
Screen Oper
ation
4.6 Linking Measurement Settings for Multiple
Channels
Ch Tracking is displayed for the Options 012 or 014.
Touching [on] sets the PPG and ED settings for Ch1 to the PPG and ED
settings for other channels. In this state, altering settings for Ch1 also
alters the settings for other channels.
Figure 4.6-1 Ch Tracking
The following settings are linked:
Programmable Pattern
Data Length
ED Tracking*
ED Gating Cycle (Repeat/Single/Untimed)
ED Gating Period
*: Setting Ch Tracking to On sets ED Tracking to On. However, setting
Ch Tracking to Off does not set ED Tracking to Off.
Setting Ch Tracking to On sets the Ch2 Reference CLK to [Ch1].