Anritsu 37 C Series, Operation Manual, Page: 22 / 603

Option 1: Adds 17S50 Sliding Load, SMA/3.5 mm Male; 17SF50
Sliding Load, SMA/3.5 mm Female; 01–211 Female Flush Short; and
01–212 Male Flush Short.
Model 3651 GPC–7
Calibration Kit
The 3651 Calibration Kit (Figure 1-2) contains all the precision compo-
nents and tools required to calibrate the 37XXXC for 12-term er-
ror-corrected measurements of test devices with GPC–7 connectors.
The kit supports calibration with broadband loads. Option 1 adds a
sliding load and a pin depth gauge. Kit consists of the following compo-
nents:
q 23A50 Short, GPC–7
q 24A50 Open, GPC–7
q 28A50–2 Termination, GPC–7, 2 ea.
(dc–18 GHz)
q 01–200 Torque Wrench
q 01–221 Collet Extractor Tool and Vial of
4 Collets
q Data Disk
Option 1: Adds 17A50 Sliding Load, GPC–7; and 01–220 GPCP–7
Connector Gauge; and 01–210 Reference Flat.Model 3652
K Connector
® Calibration Kit
PRECISION COMPONENT KITS GENERAL INFORMATION
1-6 37XXXC OM
Figure 1-2. Typical Model 365X
Calibration Kit (Repeated)