anovafurnishings.com
888.535.5005 tel
Assembly InstructIons
l1440A 4 ft Latitude Bench
l1441A 6 ft Latitude Bench
Model No. L1441P
Segmented Seating
tools needed:
9/16” Open-end or Box-end Wrench
•
1/2” Open-end or Box-end Wrench
•
5/8” Open-end or Box-end Wrench
•
Ratchet with 1/2” Socket
•
Ratchet with 9/16” Socket
•
Ratchet with 5/8” Socket
•
3/16” Allen Wrench
•
Level
•
Assembly HArdwAre:
8 x
5/16”
Washer
4 x
5/16”
Flanged Hex Nut
4 x
5/16” X 1.25”
Hex Head Bolt
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place the Bench Seat on the shipping packaging or
other soft surface to avoid scratching the product.
Note: Before assembling the Nuts to the Bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads
3. Align the mounting holes in one of the Bench Legs
with the holes in the appropriate end of the Bench Seat
support. Insert one of the provided 3/8” Bolts, with a
Washer, through both parts, with the Bolt head on the
outside surface of the Bench Seat support. Install a
Washer and Nut on the inside end of the Bolt.
Leave the hardware finger tight so that adjustments
can be made later to level the Bench Seat.
Install a Bolt with Washer through the other mounting
hole in that Bench Leg and Bench Seat Support and
add a Washer and Nut to the end of the Bolt. Again,
leave the hardware finger tight.
4. Repeat this for the other Bench Leg. Leave the
hardware finger tight so adjustments can be made to
level the Bench Seat.
Model L1440A shown.
bencH components:
1 x Bench Seat
2 x Bench Legs
2 x Cross Braces
2 x Arm Rests
8 x
3/8”
Washer
4 x
3/8”
Flanged Hex Nut
4 x
3/8” X 1.5”
Hex Head Bolt
Model No. L1441P
Segmented Seating
Bench Leg
Bench Seat
Support
Washer
3/8” Bolt
Washer
Nut
Shipping cardboard
and plastic or other
soft surface
8 x
5/16”
Breakaway Nut
8 x
5/16” X 1.0”
Socket Head Bolt
16 x
5/16”
Washer
