anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•
11/16" Open-end or Box-end Wrench
•
Ratchet with 11/16" Socket
•
7/16" Open-end Wrench
•
Flat Head Screw Driver
•
Level
Assembly Instructions
Streetside
L1369A -
Streetside 6' Contour Bench with Divided Seating
COMPONENT PARTS:
ASSEMBLY HARDWARE:
All hardware is stainless steel.
(4) 7/16"-14
Hex Nut
(4) 7/16" Lock Washer
(4) 7/16" Flat Washer
(8) 1/4"-20
Acorn Nut
(8) 1/4" Flat
Washer
(8) 1/4"-20 X 3/4"
Slotted Bolt
(1) Contour Bench Seat
(1) Right Side
Bench End
(1) Left Side
Bench End
ASSEMBLY:
Inspect the shipping container contents for damage and to
determine that all components and hardware are present.
1.
The assembly is a two-person operation.
2.
Lay all parts on a soft work surface or on the shipping
packaging to prevent damage to finish.
3.
Align the mounting studs in one of the bench ends with the
holes in the appropriate end of the bench seat.
4.
Insert the mounting studs on the bench end through the
mounting holes in the bench seat. Install a 7/16" flat washer,
then a 7/16" lock washer and a 7/16" hex nut on each of the
mounting studs.
Repeat this step for the opposite bench end.
Leave the hardware finger tight so that adjustments can be
made during assembly and to level the bench.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied to
the screw threads.
1
(2) Armrests
7/16" Hex Nut
7/16" Hex Nut
7/16" Lock Washer
7/16" Lock Washer
7/16" Flat Washer
7/16" Flat Washer
Mounting Studs
Hole near middle of
bench seat denotes
backrest portion
Hole near bend of bench
seat denotes seat portion
