anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•
1/2" Open-end or box-end wrench
•
Ratchet with 1/2" socket
•
Level
•
Rubber Mallet
Assembly Instructions
D1007
D1105
D2003
D2003COM
D2005
D2006
D2014
L2003
TABLE COMPONENTS:
ASSEMBLY HARDWARE:
All hardware is stainless steel.
(2) Table Supports
(1) Table Top
(2) Seats
(2) Cross Braces
ASSEMBLY:
Inspect the shipping container contents for damage and to determine that all components and hardware are present.
1.
2.
Place the tabletop upside down on the shipping packaging or
other soft surface to avoid scratching the product. Locate one
of the supports and position it near the end of the tabletop.
3.
Align the mounting holes in the support with the holes in
the bracket on one end of the tabletop. Install a washer onto
one of the provided bolts and insert the bolt through onto
one of the provided bolts and insert the bolt through one of
the mounting holes in both parts, with the bolt head on the
outside surface of the support. Install a washer and nylock
nut on the inside end of the bolt.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied to
the screw threads.
NOTE: Installing the bolt in this direction reduces the risk of
scratching during use.
Leave the hardware finger tight so that adjustments can be
made during assembly and leveling.
Install a bolt and washer through the mounting hole in the
support and tabletop bracket, and install a washer and nylock
nut. Again, leave the hardware finger tight.
1
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
Picnic Table
F1038
F1105
F1149
F2003
F2014
F6420
(16) 5/16"-18 x 1 1/4"
Hex Head Bolts
(16) 5/16-18
Nylock Nuts
(32) 5/16
Flat Washers
(4) Rubber Feet
The assembly is a two-person operation.
Support
Support
Washer
Washer
Bolt
Nylock
Nut
Tabletop
Bracket
Tabletop
packaging cardboard
or other soft surface
