annke DN41R User Manual Download Page 84

Page: 84 / 106

Digital Video Recorder User Manual

11.3 Configuring Quota Mode

Purpose

Each camera can be configured with allocated quota for the storage of recorded files.

Steps

Enter the Storage Mode interface.

Menu > HDD > Advanced

Set the

Mode

to Quota.

The DVR must be rebooted to enable the changes to take effect.

Figure 11. 9 Storage Mode Settings Interface

Select a camera for which you want to configure quota.

Enter the storage capacity in the text field of

Max. Record Capacity (GB)

You can copy the quota settings of the current camera to other cameras if required. Click the

Copy

button to

enter the Copy Camera interface.

Figure 11. 10 Copy Settings to Other Camera(s)

Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of

Analog to select all cameras.

Click the

button to finish the Copy settings and back to the Storage Mode interface.

Click the

Apply

button to apply the settings.

If the quota capacity is set to

, then all cameras will use the total capacity of HDD for record.

Summary of Contents for DN41R











































































































Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands

annke DN41R, User Manual

Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands