annke DN41R User Manual Download Page 57

Page: 57 / 106

Digital Video Recorder User Manual

Chapter 7 Backup

7.1 Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1 Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer), SATA writer and e-SATA HDD.

Backup using USB flash drives and USB HDDs

Steps:

Enter Export interface.

Menu>Export>Normal

Select the cameras to search.

Set search condition and click

Search

button to enter the search result interface.

Figure 7. 1 Normal Video Search for Backup

The matched video files are displayed in

Chart

List

display mode.

Click

to play the record file if you want to check it.

Check the checkbox before the video files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Figure 7. 2 Result of Normal Video Search for Backup

Select video files from the

Chart

List

to export, and click the button

Export

to enter the Export interface.

Summary of Contents for DN41R











































































































Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands

annke DN41R, User Manual

Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands