Page
11
of
16
9.1 Cleaning the Micro Fibre Pad
The Micro Fibre Pad must be cleaned regularly for best cleaning
performance.
Simply wash the Micro Fibre Pad in warm mild soapy water, rinse in clean
fresh cold water and let dry.
The Micro Fibre Pad may be washed in a washing machine on a Normal
Wash.
DO NOT
scrub the Micro Fibre Pad or Tumble Dry.
9.2 Reduced Steam Flow
Should there be a build-up of scale etc. the flow of steam will be restricted
and there may be small particles of scale left of the floor surface.
The scale needs to be cleaned away as follows:
Disconnect from the power supply and wait for the appliance to fully
cool down.
Cleaning solution:
•
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the
water tank.
•
Position and secure the mop over a sink. Ensure steam released from
the mop head is aimed into the sink and can’t do any harm to surrounding
surfaces, objects, pets or people, etc.
•
Plug the unit in and wait for approx. 30 seconds for the unit to heat and
then tilt the handle back, so that it disengages from the floor head lock
position, to start the steam.
•
Let the mop produce steam until the vinegar/water solution is used up.
•
Repeat the above procedure as many times as necessary until a normal
steam flow rate is achieved.
Summary of Contents for JC-230
Page 1: ...Steam Mop User Manual Model No JC 230 Rev 1 READ AND SAVE THESE INSTRUCTIONS...
Page 2: ...Page 2 of 16...
Page 14: ...Page 14 of 16...
Page 16: ...Page 16 of 16...
