PARTS
CHARGING THE DEVICE
Charge the device before use.
Please charge the device for 1.5 hours before first use to extend the battery life.
Make sure the device is turned OFF.
Insert the USB cable into the USB charging port, then connected the USB
charging cable into a USB power source (DC 5V 1000mA power source).
While charging, the charging indicator lights up in a cycle. When the battery is
fully charged, all the charging indicator levels will light up.
Charging the device takes approximately 1.5 hours. When the battery is fully
charged, the device can be used continuously for approximately 1.5hours.
HOW TO USE
We recommend you use it when your pores are enlarged such as after taking bath,
etc.
Cleansing 1 or 2 times a week is recommended.
Remove any make-up from your face, leaving your skin bare.
IMPORTANT! Never use the appliance on skin coated with cleansing lotion or
facial soap.
Note: Please note it is normal that your skin might get red after using the pore
cleaner. The temporary redness will gradually recover within a few hours,
depending on your skin type. If the redness stays more than 3 days, please
seek medical advice.
