PC T EL
9 5
6. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
7. A green light on the scanner Device Status window should start blinking. This means that the
device is working properly and scanning using the default settings.
8. Click the Start Recording button
to start recording the results in an output file.
Frequency Scanning – PCTEL CDMA/EVDO Scanners
1. After the scanner is connected and activated in Nemo Outdoor, open the
Measurement
Properties
dialog by selecting
Measurement | <device> | General Properties
.
2. By clicking the
Advanced
button, you will access the
Advanced Properties
dialog. Here
you can enable and disable the integrated GPS receiver. This means you will not need an
external GPS receiver in order to collect position data.
3. Go to the
Frequency scanning
page.
Channel style
refers to the style of the channel. For EVDO scanners, the options are 1250 kHz
Normal and 30 kHz Normal.
Sample size
defines the number of samples taken from each channel before a measurement
result is written to file.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
