Anite NEMO FSR1, Manual

Page: 41 / 137

A n r it s u 4 1
STARTING ANRITSU SCANNERS
1. Start Nemo Outdoor. Do not load any previous device configuration if asked.
2. From the Measurement menu, select Add New Device .
3. Click on Scanner .
4. From the list select:
•
For Anritsu ML8720B: Anritsu ML8720B UMTS 2100 and click Next .
•
For Anritsu ML8720C without the GSM option: Anritsu ML8720C UMTS 2100 and click
Next .
•
For Anritsu ML8720C with the GSM option: Anritsu ML8720C GSM/UMTS and click
Next .
•
For Anritsu ML8740A and Anritsu ML8740B without the GSM option: Anritsu ML8740A/
ML8740B UMTS 2100 and click Next .
•
For Anritsu ML8740A and Anritsu ML8740B with the GSM option: Anritsu
ML8740A/ML8740B GSM/UMTS and click Next .
•
For Anritsu MS2721B DVB-H Analyzer: Anritsu MS2721B DVB-H , and click Next .
•
For Anritsu MS2721B Spectrum Analyzer: Anritsu MS2721B Spectrum Analyzer , and
click Next .
5. In the Scanner Properties dialog, set the COM Port to the port the scanner is connected to
(ML8720B/ML8720C)/select the USB port (e.g., Anritsu USB1)/or select the Anritsu LAN 1-4
with Anritsu MS2721B DVB-H depending on which IP address was selected for the scanner.
♦
The next step is not valid for the Anritsu ML8740A, Anritsu ML8740B, Anritsu MS2721B
DVB-H, or Anritsu MS2721B Spectrum Analyzer scanner.