Anita GARUDAN GF-1130-4412 MH, User Manual

Page: 22 / 71

© ANITA
MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH 22
E2. ADJUSTING THE LUBRICATION
E2.1. Adjusting the lubrication of the hook
1. Loosen the nut ② and adjust the amount of
lubrication with the screw ①. Turn the screw clockwise
to decrease or counterclockwise to increase the amount
of oil.
2. Test the proper amount of lubrication with a paper.
Place the paper close to the hook and bring the machine
to maximum speed for a few seconds. You should see
thin lines formed by the oil on the paper.
Too much oil Correct amount of oil Too little oil
E2.2. Adjusting the lubrication of the upper oil tank
1. If too much oil accumulates in the upper oil tank, tilt the machine head and loosen the nut
① . T urn the screw ② counterclockwise. If the oil level is too low, turn the screw clockwise.
www.garudan.cz