Anita Garudan GC-3317 Series, User'S Manual And Spare Parts Book

Page: 9 / 61

ANITA ©
GC-3317-443 MH 9
8. INSTALLING THE BELT COVER
Install three belt cover supports (1) to the machine. Install the belt cover (2) to the belt cover
supports using screws (3). Install the belt cover (4) to the table using the wooden screws (5).
Install the belt cover support (6) to the machine and install the belt cover (7) to the belt
cover support and the belt cover (2) using screws (8),(9). Install the belt cover (10) to the
belt cover (2) using screws (11). Place boobin winder (12) in the belt cover, and position it so
that it does not contact the belt cover before fixing it with the wooden screws (13). (fig.3)
(fig.3)
9. INSTALLING THE KNEE LIFTER
Installing the knee press plate asm (2) to the
shaft (1). (fig.4)
(fig.4)
www.garudan.cz