Anita Garudan GC-3317 Series, User'S Manual And Spare Parts Book

Page: 15 / 61

ANITA ©
GC-3317-443 MH 15
18. NEEDLE TO HOOK RELATIONSHIP
Remove throat plate (3) and hook cover (2). Bring the needle bar down to its lowest point.
Loosen the needle bar clamp screw (1). Bring the needle bar up to 2,2 mm from its lowest
point turning the handwheel. Adjust the distance between the top edge of needle eylet and
hook point (5) to 1,5 mm when hook point nearly meet the center of needle then tighten the
needle bar clamp screw (1).
The needle to hook clearance
Loosen screws (4) in the hook and move the hook to the right or left until a clearance of 0,02
to 0,05 mm is provided between the blade point of the hook and needle. After the
adjustment, securely tighten the screws.
(fig.13)
www.garudan.cz