Angioscan Electronics AngioScan-01, User Manual, Page: 77 / 119

Graphic Interface 73
© 2014 AngioScan-Electronics LLC
To database...
This option allows to export data of one or several tests to another AngioScan database for transferring it
to another computer. It is possible to export several records if you mark them as it is described in "
Mark
Several Records for Group Operations " menu. The files can be added to already existing database or to
a new one. The following dialog will appear:
It is also possible to export all scan data of one or several registered patients if you go to "Export
selected records..." in local menu of the window.
5.1.1.14 Simulate Scan
This command simulates a real-time printing using the saved data as if the sensor received the real
signal. It allows to demonstrate the device operation in its absence.
This command is available via local menu bar, right-click the mouse and it will show up (the command
does not have its toolbar button).
5.1.1.15 Recalculate of Scan Results
This command helps to recalculate one or several scan results saved in database. In the process of
AngioScan software development, data processing algorithms can be changed, and thus, reprocess will
be required for all scan data.
This function affects only those results that are displayed in database window. When
downloading test results the data is always recalculated, and the results displayed in "Measurements"
window after download correspond to the current recalculating algorithms.
it is possible to initiate the recalculation process of several records if you mark them as it is described in
"
Mark Several Records for Group Operations " menu.
This command is available via local menu of the window, activated by right click (the command does not
have its toolbar button).
5.1.1.16 Thumnails of PPG Contour Analysis Results
This command displays graphs of pulse waves, received as compressed test results (in the form of
thumnails). It allows to estimate the form of curves received from tests performed in different time. This
command is available via local menu of the window activated by right click of the mouse (the command
does not have its toolbar button).