- 5 -
3220000_ut_GB
ENGLISH
GB
Although the appliance is complete with all
safety devices, during installation and con-
nection additional devices must be added if
necessary to comply with the relevant legal
requirements.
A)
Heat sensor:
each plate is equipped with this
device, which halves its power output in case
of overheating. Once the problem has been
resolved and the temperature has returned to
normal, operation is automatically restorede.
B)
Heat sensor:
warns of overheating in the
components compartment.
Caution - Warning
All safety devices are located inside the ap-
pliance module and are therefore not visible
from the outside.
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs
provided.
A)
Nameplate with manufacturer and
appliance data.
B)
General hazard
: read the manual carefully
before carrying out any procedure.
C)
General hazard
: When washing the applian-
ce do not point pressurised water jets at
internal parts.
D)
General hazard
: all relevant regulations
must be complied with. “Install in complian-
ce with the relevant regulations and use in
well ventilated premises only”.
E)
General hazard
: all relevant regulations
must be complied with. “No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions”.
F)
Burn hazard
: watch out for hot surfaces.
G)
CE marking:
indicates that the appliance is
compliant with the relevant norms.
H)
WEEE Symbol
: indicates that the appliance
is subject to specifi c waste disposal regula-
tions.
37M3202
A
B
C
E
D
G
F
3168040
ɉɊɈɂɁȼɈȾɂɌȿɅɖɇȿɇȿɋȿɌɈɌȼȿɌɋɌȼȿɇɇɈɋɌɂɁȺɄȺɄɈɃɅɂȻɈɍɓȿɊȻɉɊɂɇȿɋɈȻɅɘȾȿɇɂɂɉɊȺȼɂɅ
ɆɈɇɌȺɀȺɂɗɄɋɉɅɍȺɌȺɐɂɂ
ȺɉɉȺɊȺɌȾɈɅɀȿɇɍɋɌȺɇȺȼɅɂȼȺɌɖɋəɋɈȽɅȺɋɇɈȾȿɃɋɌȼɍɘɓɂɆɉɊȺȼɂɅȺɆɂɂɋɉɈɅɖɁɈȼȺɌɖɋəɌɈɅɖɄɈȼ
ɏɈɊɈɒɈɉɊȼȿɌɊɂȼȺȿɆɕɏɉɈɆȿɓȿɇɂəɏ
H
OPTIONAL ACCESSORIES
The appliance can be equipped with the
following accessories on request (“see general
catalogue”).