Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Dalo Fountain
AD99101
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT
return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Locate the light cable and
attach it to the
transformer.
To prevent the risk of
water loss, create a drip-
loop with the light cord
inside the fountain.
Locate the tubing and
attach it to the pump.
Water flow can be
adjusted using the dial
located on the front of the
pump.
With the tubing attached,
place the pump inside the
fountain. Make sure there
are no kinks in the tubing
as this may impact water
flow.
Align and install the pump
access door.
Align the cords with the
groove as shown. Any
excess cord can be
pushed inside as desired.
The included shims can
be used to level the
fountain or to adjust it if
excessive splashing is
observed.
DR
IP
LOO
P
