Castillo Fountain
AD92019
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Carefully unpack and arrange
all parts.
Pass the tubing and cords
from the light down and in to
the fountain body.
Lower the top on to the fountain.
Locate and retrieve the tubing
and light cords.
Attach the tubing to the
pump.
Place the pump inside the
fountain.
Securely connect the light cords
to the bridge as shown above.
Attach the cord from the bridge to the
transformer. Align the cords then slide
the pump access door in place.
The light connection
must
sit
outside the fountain.
Do not
submerge.
