Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for
assistance and warranty information.
AD97897
Buddha Fountain
Carefully unpack and arrange all
parts.
Locate the light cable from inside
the fountain and attach it to the
corresponding connection of the
pump.
To prevent the chance of water loss,
ensure the cable from the light has a
drip loop before it exits out the rear.
Locate the tubing from inside the
fountain and connect it to the pump.
The pump is set to full strength,
adjust as needed. Place the pump
inside the reservoir. Any excess
cord can be retrieved out the back
of the fountain.
Pass this connection and the pump
cord out the access hole at the back
of the fountain.
Attach the pump cord to the
transformer.
Insert the included black foam in to
the reservoir. This will help to hide
the pump and cords and curb any
unnecessary splashing.
D
R
IP
-L
OO
P
