Alpine Falls Fountain
AD97728
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Locate the tubing from inside the
fountain and connect it to the pump.
Arrange all the parts on
the work area.
The pump is preset to full strength.
If splash is a concern, adjust as
needed.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Place the pump inside the reservoir so that the
pump is fully submersed.
Locate the tubing from inside the
fountain and connect it to the pump.
Arrange all the parts on
the work area.
The pump is preset to full strength.
If splash is a concern, adjust as
needed.
The final assembly
should look like this
