Fossil Falls Fountain
AD97741
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Arrange all the above parts in your work area.
Locate the tubing from inside the fountain and
connect it to the pump. The pump is preset to full
strength, if splash is a concern adjust the flow
control as needed.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Arrange all the above parts in your work area.
Locate the tubing from inside the fountain and
connect it to the pump. The pump is preset to full
strength, if splash is a concern adjust the flow
control as needed.
Place the pump inside the reservoir so that it is
sitting flat.
The final assembly
should look like this
