Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item,
DO NOT
return the unit to place of purchase
. Please visit our web site
www.angelodecor.com
for assistance and warranty
information.
AD92613
Girl at Well Fountain
Carefully unpack and
arrange all parts.
Retrieve the tubing and light
connection from the
fountain.
Attach the tubing to the
pump. Water flow can be
adjusted using the control on
the front of the pump.
Place the pump inside the
fountain.
Securely attach the cable
from the light connection to
the transformer.
IMPORTANT:
to prevent
water loss during operation,
create a drip-loop with the
light cable by dipping it into
the reservoir before it exits
out the back of the fountain.
Gently place the globe on
top of the fountain as shown
Install the light access door
by sliding the door in place.
The light unit comes pre-
installed but the light can be
accessed through this
opening if needed.
Align the pump and light
cords with the groove, then
slide the pump access door
in place.
