SOLAR HYBRID PUMP
USER’S MANUAL AD40035
1.
BEFORE YOU BEGIN – ASSEMBLY
Unpack all components carefully.
Install the 4 batteries (supplied), in proper orientation (+/-), in the
housing at rear of solar panel. Be sure the cover closes properly.
Fully charge the unit
using either direct sunlight (minimum 6 hours)
or the hybrid charging unit plugged into an indoor power receptacle.
2.
PREPARATION FOR USE, For FOUNTAINS
Install the pump in the fountain reservoir area ensuring it is
completely submersed in water.
Connect the pump cable to the socket of the control housing on the
rear side of the solar panel.
Connect the optional LED light cable to the socket of the control
housing. (If required)
Choose an appropriate location for the solar panel that will
allow the best possible exposure to sunlight.
