AIRPRO [L]
14
5.4
Pre-installation Checklist
Before installation, make sure the following requirements are met:
Check
Description
The fan can only be mounted to the I-beam or a concrete beam. DO NOT mount the fan directly to
a single stringer, truss shelf or light steel shelf. For installation methods not included in this manual,
please consult a structural engineer.
The mounting structure approved by structural engineers. The mounting system must be able to
withstand the torque generated by the fan.
Having been familiar with the functions of the safety cable.
。
.
For the fan installation, the fan blades should be at least 3,05 meters above the ground. Please
refer to section 5.1 Clearances.
For the fan installation, the distance between the blades and other objects/building structure should
be at least 0,6 meters. Please refer to section 5.1 Clearances.
The center-to-center distance between two fans should be at least 3 times the diameter of the fans.
The Mounting Base kit size should match the I-beam. Please refer to section 5.3 I-Beam conditions.
SAFETY!
Ensure the minimum requirements are met.
Failure to do so may result in equipment damage.
5.5
Blade guide
The Anemoi Airpro [L] comes with seven blade guides for install the blades easily
1. Install the 7 blade guides on the
motor, this step can be completed on
the
ground.
(Recommended
tightening torque: 24Nm)
Use M10 Bolt Kit (14 x M10)
