S T E P 1
In order to use the lamp as a wall lamp, two screws or hooks are needed. Choose where the
lamp shall be placed on the wall and mark it with a pencil. With a ruler and a spirit level,
measure a 12 cm distance in a vertical line and mark where the second screw or hook is to
be placed.
S T E P 2
Drill holes on the marks and insert the correct type of screws and plugs, appropriate for the
wall of installation.
S T E P 3
The lamp is now ready to be installed by placing the holes in the lamp base over the screws.
S T E P 4
Adjust the light intensity to desired level by turning the dimmer on the side.
220-240V - 50 Hz
12 cm
