Argus
®
Installation
Instruction Manual, 353mm (13.9”) Profile Panel Antennas
General
This instruction manual contains all necessary information required to assist in the correct
installation of ARGUS Panel Antennas of 353mm (13.9") width to a 75 – 115mm (3" - 4.5")
diameter pipe when using the mounting kit with clamp bracket. These antennas can be
supplied with either fixed beam downtilt, manually adjustable electrical downtilt or AISG-
compatible remotely controlled electrical downtilt. Mechanical downtilt is also available if
required, depending on the type of mounting kit selected.
Following symbols can be found next to text outlining important information.
Please follow the procedure marked with this symbol precisely.
Non-compliance may lead to damage of the product.
Handy tips when installing product.
Unpacking
Make sure that the antenna and the accessory items listed below are provided and have not
been damaged during transport.
•
Antenna
•
Mounting kit (mounting kit components for each configuration are shown in Figures
2 and 3).
•
Hex key 6mm AF (supplied with adjustable downtilt antennas only).
Mounting Kit
Type
600mm – 870mm
(23.6” – 34.3”)
Antennas
870mm – 1200mm
(34.3” – 43.3”)
Antennas
1200mm – 1575mm
(43.3” – 62”)
Antennas
1575mm – 2700mm
(62” – 106.3”)
Antennas
Fixed Downtilt
F-042-GL-E
F-042-GL-E
F-042-GL-E
F-042-GL-E
Mechanical
Downtilt
T-095-GL-E
T-045-GL-E
T-041-GL-E
T-029-GL-E
Tilt range
0
°
-15
°
in 3
°
steps
0
°
, 2
°
-10
°
in 1
°
steps
0
°
- 12
°
in 1
°
steps
0
°
- 8
°
in 1
°
steps
Mounting
Bracket Spacing
Dim A (Fig 4)
480mm (18.9")
716mm (28.2")
976mm (38.4")
1400mm (55.1")
Table 1: Mounting Kit Part Numbers for Different Antennas
Bulletin A997-0083 · Revision H · March 2015 page 1 of 7
CommScope Infrastructure Academy offers installation training
