DN:KD-752-SMSY01 V1.0 Operation Guide
11/19
f.
After measurement, the monitor will turn off automatically after 1 minute with no
operation. Alternatively, you can press the
“START” button to turn off the monitor
manually.
g.
During measurement, you can press the
“START” button to turn off the monitor
manually.
Note: Please
consult a health care professional for interpretation of pressure measurements.
Picture 7-1 Picture 7-2 Picture 7-3 Picture 7-4
（
3
）
MULTIPLE MODE
a.
After applying the cuff and your body is in a comfortable position, place the standard /
multiple switch on the
“MULT” side.
b.
Press the
“START” button, the initial information and settings are the same as
section 7(2)b~d.
c.
Then multiple measurements are automatically taken and the result is automatically
analysed and displayed. The result will also be stored in the Memory bank of the
monitor automatically.
d.
After measurements, the monitor will turn off automatically after 1 minute with no
operation. Alternatively, you can press the
“START” button to turn off the monitor
manually.
e.
The measurement result will be shown after multiple measurements. The individual
results will not be displayed.
f.
Please keep quiet and calm during the entire process and do not remove the cuff
between measurements.
g.
During the entire measurement process, you can press the
“START” button to turn
off the monitor manually.
8. DISPLAYING STORED RESULTS
a. In Standby Mode
, press “MEM” button, the monitor will display sign of current group.
The amount of results in current user memory zone will be displayed.
See picture 8-1
.
Press
“START” button to switch group, press “MEM” to confirm current group. The
current bank can also be confirmed automatically after 5 seconds with no operation.
b. Then LCD will display the average value of all results in the current bank.
See picture
8-2.
If no result stored in the current user memory zone, LCD will display “0” for blood
pressure and pulse rate.
See picture 8-3
.
c.
Press “MEM” button, the LCD will display the average value of the last three results in
the current user memory zone.
See picture 8-4
. If no result stored in the current user
