ANDI - WMA 7612 L - DISASSEMBLY
1- TOP PLATE
•
Remove the two screws that attach the top plate to the cabinet.
•
Push the top plate back and then lift upwards and take it out.
2- REAR COVER
•
Remove the five screws that attach the back cover to the cabinet.
•
Lay the cover 90º to the cabinet and lift to remove.
3- FRONT DOOR
•
Open the front door.
•
Remove the two screws that secure the front door to the hinge. ( Figure 1a)
Figure 1a
3a- FRONT DOOR (New BIG DOOR)
The opening side of the big porthole can be changed. It might be wanted that the
180º opening big front door to be opened to right instead of left because of the
ergonomic loading demands where it is placed at home. Therefore instructions for
changing the opening side of the washing machine together with assemblying and
disassemblying instructions are explained below.
To change the opening side of the big porthole
•
Detach the door hood from the front panel by taking out the cabinet hood
clamp.
•
Detach the door lock from the front panel by unscrewing the two plastic
screws.
•
Unscrew the two hinge bolts (M5x10) and take out the front door assembly
from the front panel.
•
Unscrew the screw(4,2x9,5) which fixes the hinge support bracket to the front
panel.
•
Unscrew the screws of the front panel and detach it from the cabinet.
•
Secure the cables going to the door lock at the appropriate hole on the panel
support with a cable clamp by arranging its length (if we are to place the door
lock underneath the detergent dispenser, we should open the wrapping and
extend the cable or if we are to place the door lock underneath the timer, we
shold wrap the cable).
a – Door opening button
Front door
screw - b
Hinge screw-c
