Anderson TSR-3450, Operator'S Manual

Page: 23 / 70

Anderson Group Self loading trailer TSR-3450
– Operator’s Manual 21
4 Ajustements
To effectively manipulate the various sizes of bales, you will have to adjust the trailer. These
adjustments must be made before you load your bales.
You can adjust the following components:
Length of bales :
• Stopper of the grabber
•
Bale guides
Width of bales :
• Width of the grabber
•
Distance of the pusher cycle
Height of bales:
• Loading arm position
4.1 Pusher stopper
The depth of the grabber on the loading arm is adjustable according to the length of the bales
you are loading. To collect bales between 1.2 and 2.25m (4 to 7 ft) in length, you will have to
install the rectangular backstop between the forks. (See Figure 4.1 ) This backstop is not
necessary to transport bales of 2.4m (8ft) .
Figure 4.1 Ajusting the depth of the grabber