Anderson TSR-3450, Operator'S Manual

Page: 21 / 70

Anderson Group Self loading trailer TSR-3450
– Operator’s Manual 19
6- Be sure that the hoses are placed well between the tractor and the trailer. Verify
that they are not twisted or they may pinch and will wear out prematurely.
7- Attach the control lever to the armrest of the driver’s seat and within arm’s reach of
the operator.
8- Hook the 12V power connection for the electric controls to the trailer.
9- Attach the signal lights of the trailer.
10- Remove the pin that retain the cylinder of the loading arm. (see Figure 2.1 Erreur !
Source du renvoi introuvable. )
11- Test each hydraulic function on the trailer to be sure that the hydraulic hoses are
connected properly, (see 5.1) to see how to use the joystick to operate the functions
of the self-loading trailer.
12- If necessary, adjust the hydraulic flow of your distributors.
The trailer is now ready to load and transport your bales.