Anderson SMARTMIX A1230FD, Operator'S Manual

Page: 125 / 129

Anderson Group Mixer – Operator's Manual 123
Table 19 — Metric Bolt Tightening Torque
Diameter (mm)
6 8 10 12 14 16 18 20 22 24
M6 M8 M10 M12 M14 M16 M18 M20 M22 M24
Pitch (mm) 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3
Tightening torque in N m
CLASS 4.6 5 11 22 39 62 96 133 188 256 325
CLASS 8.8 12 30 59 104 165 257 355 501 683 866
CLASS 10.9 18 44 87 152 243 377 521 736 1,004 1,272
CLASS 12.9 21 52 102 178 284 441 610 862 1,175 1,489
Diameter (mm)
6 8 10 12 14 16 18 20 22 24
M6 M8 M10 M12 M14 M16 M18 M20 M22 M24
Pitch (mm) 0.75 1 1 1.25 1.5 1.5 1.5 1.5 1.5 1.5
Tightening torque in N m
CLASS 4.6 5 12 25 42 67 103 149 209 281 369
CLASS 8.8 14 32 66 113 179 274 399 556 750 985
CLASS 10.9 20 47 97 166 262 402 585 817 1,102 1,447
CLASS 12.9 23 55 112 194 307 471 685 956 1,290 1,693
7.14 Cleaning
Before storing the machine, thoroughly clean and grease it.
Any build-up that accumulates during work can make your machine rust more quickly. Regularly
remove it with a power washer at the intervals specified in "Maintenance schedule" on page 98.
7.14.1 Personal protective equipment
When cleaning the machine, especially with a pressure washer lance, wear personal protective
equipment (gloves, goggles, etc.) to protect yourself from the spray.
7.14.2 Cleaning method
Cover all openings that need to be protected from water, steam or cleaning products.
If using a pressure washer lance, avoid holding it too close to the machine or directing the spray
towards hydraulic components, joints, fill caps, electrical connections, safety labels, etc.
Spaces are provided to pass the lance inside the conveyor and more easily clean the belt.