Anderson SMARTMIX A1230FD, Operator'S Manual

Page: 107 / 129

Anderson Group Mixer – Operator's Manual 105
7.2.2 Greasing the planetaries
Grease the planetaries after every 100 hours of use with NLG1 Type 2 synthetic lithium grease:
1. Remove the access hatch (see Figure 55-A).
2. Locate the fitting to grease below the oil tanks on the side of the machine.
3. Grease the planetary until grease comes out the hole on top of the planetary (see Figure 55-
B).
Figure 55 — Greasing the Planetaries
Before entering the mixing chamber, unhitch the
tractor from the machine to prevent it from starting
accidentally.
Use safe and stable means of access and ensure
that the mixing augers and the inside of the mixing
chamber are clean.
Wear protective equipment (gloves, goggles, etc.)
and use appropriate tools.