32
There are 2 ways of unloading your bales using the RBMPRO 2000.
On the left, you can see the bales being unloaded on their flat side. On the right, they
are unloaded on their round side.
Please follow the instruction and pictures to ensure a proper unloading of your bales,
which will prevent tears in the wrapping.
Lower the rear roller support
Activate the unloading cylinders
Activate the bale pusher and start
going forward (2km/h) to prevent the
bales from piling up.
Lower the rear roller support,
activate the bale pusher and start
going forward (2km/h) to prevent
the bales from piling up.
Unloading tips
PROCEDURE REF# A-RBM-018
Summary of Contents for RBMPRO
