Model(s) : RBMPRO
Bale carrier
Diagnostic procedure
10
When the grabber releases the bales
on the main deck, the bales do not
roll well to the opposite side (far side
from the loading arm)
Bales are picked up
vertically
Bales are picked up
horizontally
When picking up the bales
on their side you have to
center them in the
grabber
Ensure that the bales are entirely in the grabber
and not just pinched by it. Verify loading
settings in the Danfoss control to set the arm in
the correct initial position for picking up bales
on the flat side
Summary of Contents for RBMPRO
