Model(s) : RBMPRO
Problem with
loading arm
Bale carrier
Diagnostic procedure
Loading arm is
dragging on the
ground
When collecting
bales that are sitting
horizontally on the
ground (bales are not
standing on their flat
side), the grabber is
not positioned
perpendicular to the
ground
The bales hit
the loading arm
but it wont pick
them up
automatically.
8
When the
grabber
releases the
bales on the
main deck, the
bales do not
roll
perpendicularly
to the trailer
main axis
Adjust the loading arm’s
« initial » angle to the
ground through the
Danfoss controller until
the clearance to the
ground is sufficient
Adjust the
sensor
»
The bales hit
the loading arm
but it wont pick
them up
automatically.
(LS-BA)
Summary of Contents for RBMPRO
